Arduino MATERIA 101 Uživatelský manuál stáhnout pdf (Strana 36)

Assembly Manual

Arduino Materia 101

assEmBlINg ThE fRamE

Fig. 18

Fig. 20

Fig. 19

Fig. 21

Fig. 18

Take the Y motor and using a

crosshead screwdriver, unscrew

screws no. 2 and 4 from the motor’s

back. Connect the motor cable with

M3x35 bolts (2). Assemble the motor

on the frame, leaving the connector

oriented towards the frame’s bottom.

Fig. 19

The T2.5 160 belt must be hooked

up to the stepper motor pulley.

Working on the same motor and

tightening the two screws, you will

pre-tighten the belt.

Fig. 20 - 21 - 22

Take the remaining grey cable and

connect the white connector to

the X motor (Fig. 20). Connect the

motor cables (2): one to the Y motor

(fig. 21) and one to the Z (fig. 22).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 54 55

Žádné komentáře

Arduino MATERIA 101 Uživatelský manuál Strana 36